RODE NT2A CONDENSER MICROPHONE STUDIO BUNDLE
INCLUDING SM6 SHOCK MOUNT & POP FILTER, CABLE AND MORE..

Designed and manufactured in Sydney, Australia - The new NT2-A is a professional large capsule (1") condenser studio microphone with variable pick-up pattern, Variable high pass filter and variable pad. These features provide greater creative control and versatility. Three 3-position switches located on the mic body provide the freedom to step from Figure 8, Cardioid or Omni polar pick-up patterns; from a flat response to either 80 Hz or 40 Hz high-pass filter and a Pad adjustment of 0 dB, -5 dB or -10 dB attenuation.

Features

The Australian designed and manufactured HF1 1" edge terminated, gold sputtered, dual 5 um diaphragm capsule.
3-position variable polar pattern: Omni, Cardioid & Figure 8; all controlled on the mic.
3-position variable high-pass filter: Flat, 80 Hz or 40 Hz.
3-position variable pad: 0 dB, -5 dB or -10 dB.
Ultra low noise, transformerless SMT circuitry.
Wide dynamic range.
High strength heat-treated steel mesh head.
Durable satin nickel finish.
Internal capsule shock mounting.
Supplied complete with soft pouch and clip.
FREE shock mount and pop filter
FREE professional 20' microphone cable
FREE microphone dust cover

Omnidirectional Polar Response Figure 8 Polar response Cardiod Polar Response
(Picks up all sides evenly) (Picks up the front and rear and rejects the sides) (Picks up the front & sides and rejects the rear)

Specifications

Acoustic principle:
Externally polarized 25 mm (1") dual diaphragm.

Directional pattern:
Multi-pattern (see graphs over).

Frequency range:
20 Hz ~ 20 000 Hz (see graphs above)

Output impedance:
200 Ohms

Signal/Noise ratio DIN/IEC 651:
87 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)

Equivalent noise:
7 dBA SPL (per IEC651, IEC268-15)

Maximum SPL:
147 dB (@ 1% THD into 1 kO)
157 dB (@ 1% THD into 1 kO) - pad at maximum

Sensitivity at 1 khz into 1 kO:
-36 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/-2 dB

Maximum output voltage:
+16 dBu (@ 1% THD into 1 kO)

Dynamic range of the mic. amplifier DIN/IEC 651
140 dB (per IEC651, IEC268-15)

Power (Supply voltage):
48 Volts (P48)

Output Connection:
3 pin XLR, balanced output between pin 2(+) and pin 3(-).
Pin 1 ground

Weight approx.:
860 grm (4.23 oz)

Dimensions:
209 mm (8.228")
55 mm (2.165")

Output:
XLR

Warranty:
1 year with free extension to 10 years following registration